How can a current flow
Electric current / Electric current I
The electric current or strength of electric current is simply called current. This describes the transfer of electrical energy and the numerical movement of free charge carriers. Charge carriers can be electrons or ions.
An electric current can only flow if there are enough free and mobile charge carriers between two different electric charges. For example in a conductive material such as metal, liquid and gas.
- Direct current
- Alternating current
- Eddy current
Current flow in comparison
The flow of electricity is often compared to running water in a pipe. The more the water flows through the pipe, the higher the amount of water. It is the same with electricity. The more electrons that flow through the conductor in one second, the greater the electrical current.
The electrical current strength is used to numerically describe the electrical current.
1000 A = 1 kA (kiloamps)
100 A (ampere)
10 A (ampere)
1 A (ampere)
0.1 A = 100 mA (milliamps)
0.01 A = 10 mA (milliamps)
0.001 A = 1 mA (milliamps)
0.0001 A = 100 µA (microamps)
The legal basic unit of electrical current is 1 ampere (A). The current values in electronics are normally between a few microamps (µA) and several amps (A). In heavy current engineering, one also knows kiloampere (not specified).
I: Electric Current
i: instantaneous value of an alternating current
î: peak value of an alternating current
I.TOTAL : Total current
I.R1 : Current through resistor R1
The symbol of the electric current or the electric current strength is the capital "I". Deviating from this, there are different spellings in upper and lower case with additional symbols that have a specific meaning. A number or letters as an index identify a specific current in a circuit.
There are various formulas for calculating the electrical current.
The current direction is indicated in circuits with an arrow. Due to different scientific assumptions and findings, two current directions are defined.
- The technical current direction (historical current direction) runs from plus (+) to minus (-).
- The physical flow direction (flow direction of the electrons) runs from minus (-) to plus (+).
- The current is shown in circuits with a (red) arrow in the technical direction of the current.
Technical direction of current (historical direction of current): From plus to minus
Before we knew the processes in atoms and the relationship between electrons, it was assumed that positive charge carriers were responsible for the flow of electricity in metals. Accordingly, the current should flow from the positive pole to the negative pole. The use of a measuring device to measure current also allows this conclusion. Although the assumption at that time was refuted, the original (historical) direction of the current was retained for practical reasons. That is why the current direction within a circuit is still defined from plus to minus today.
Physical flow direction (electron flow direction): From minus to plus
In a closed circuit, free charge carriers (electrons) are repelled from the negative pole and attracted to the positive pole. This creates a flow of electrons from the negative pole to the positive pole. This current direction is the physical current direction, which is also called the electron current direction. It corresponds to the actual flow direction of free charge carriers.
Measure the electric current
The ammeter is always connected in series with the consumer. To do this, the line of the circuit must be disconnected in order to be able to insert the measuring device into the circuit. During the measurement, the current must flow through the measuring device.
Electricity in electronics
Other related topics:
Electronics simple and easy to understand
The electronics primer is a book about the basics of electronics, components, circuit technology and digital technology.
I want that!
Experience electronics with the "Starter Edition" electronics set
Perfect for beginners and newcomers
- Entry into electronics without prior knowledge
- Quick understanding of components and circuit symbols
- Experiment without a soldering iron: just insert components
More information Order the electronics set now
- What are some alternatives to turntables
- Why Alexander couldn't conquer India
- What do you think of Comey's testimony
- How is Colgate toothpaste useful for pimples?
- Do historical texts contain sarcasm or humor
- Can I pursue BBA with actuarial science
- What are the uses of numerical mathematics
- What do politicians say about leadership
- Is a keto diet safe for hypothyroidism
- How can I be the next GaryVee
- How did the Portuguese develop nasal vowels
- Which word means to make something desirable
- What are some of the rarest professions
- Is technical analysis of stocks a pseudoscience?
- Was the first crusade a success
- How do birds and bees multiply
- Is energy quantized in classical physics
- How can peripheral proteins be removed
- What is a work scenario in Sweden
- Why are customer service
- Which songs do you feel cool with?
- What do people love about their language
- What is outsourcing logistics
- How closed are you
- Can federal prisoners be considered slaves?
- What can you tell about my future
- Are integrated graphics cards upgradeable
- Who laid the foundation for Sanskrit grammar
- Why didn't the BCCI choose Vinod Kambli
- What are custom exceptions in C.
- What is the Russian word for supply?
- How can we get rid of the lobbying industry
- What is the element type in Swift
- CNN has a radio station